| Subject: | Re: [RESOGUIT-L] Thanks guys (Qaurter Vs Plain Sawn) | | Date: | Monday, October 10, 2005 07:07:15 (-0500) | | From: | Wayne Langdon <wlangdon @......com>
|
| In reply to: | Message 286 (written by Lynn Oliver) |
Thanks for the education. So the stock inserts are plain sawn and the
Beard is Quarter Sawn.
Wayne
~~~The only difference between a rut and a grave
...is the depth ~~~
----- Original Message -----
From: "Lynn Oliver" <chief06@verizon.net>
To: <resoguit-l@elistas.com>
Sent: Monday, October 10, 2005 1:03 AM
Subject: RE: [RESOGUIT-L] Thanks guys
>> Ok. Rip sawed when I went to school means with the grain, if that's
>> also plain sawn so be it.
>
> Wayne, you are mixing up two different concepts. All boards are cut from
> the length of the log, or with the grain, regardless of whether they are
> plain sawn or quarter sawn. Perhaps this illustration will clear it up:
>
> http://www.stuarts.net/Stuwritup/quarter/quartersawn.htm
>
> Lynn
>
> ---------------------------------------------------------------------
> You're subscribed to this list with the email wlangdon@hot.rr.com
> To unsubscribe, email resoguit-l-unsubscribe@elistas.com
> For information, visit http://www.eListas.com/list/resoguit-l
> For help email resoguit-l-help@elistas.com
> For neat stuff go to http://www.resoguit.com
> The ListOwner is poobah@resoguit.com
|
Re: [RESOGUIT-L] T
Reply to this message