| Subject: | Re: [RESOGUIT-L] Emailing: hoop for reso guitar.jpg | | Date: | Monday, August 21, 2006 14:33:48 (-0500) | | From: | Wayne Langdon <wlangdon @......com>
|
| In reply to: | Message 4596 (written by Martin3) |
And just when I thought there was nothing left to be upgraded on my Regal
RD-45!!
What a cool idea! I'm definitely going to do this next time I have her
apart. She needs a #14 spider anyway and I'm going to do this upgrade then.
Thanks for the post
Wayne
Copperas Cove, Texas
----- Original Message -----
From: <Martin3@tampabay.rr.com>
To: <resoguit-l@elistas.com>
Sent: Monday, August 21, 2006 2:24 PM
Subject: [RESOGUIT-L] Emailing: hoop for reso guitar.jpg
This is a standard embroidery hoop, three ply wood laminate,( store thinks
is probably bass wood). measures 1/8" thick, 1/2" high by 10 3/8" outside
diam (of outside hoop) I used the outside hoop, drilled off the adjustment
screw flanges & it fit inside the soundwell (after cutting off a very small
amount, just enough to wedge it in tight). coated with titebond wood glue,
held in place with dowels wedged in to force against the sides of the
soundwell, being sure to have the hoop fit flush with the top of the
soundwell. Let dry 24hrs, routed out sound hole (facing neck) to egg shape,
installed new Quarterman cone with old spider & it sounds at least as good
as my OMI 60DS (76 vintage) Hope this helps.
Bob in TI
Your files are attached and ready to send with this message.
---------------------------------------------------------------------
You're subscribed to this list with the email wlangdon@hot.rr.com
To unsubscribe, email resoguit-l-unsubscribe@elistas.com
For information, visit http://www.eListas.com/list/resoguit-l
For help(do's n'don'ts) email resoguit-l-help@elistas.com
For neat stuff go to http://www.resoguit.com
The ListOwner is poobah@resoguit.com
|
Re: [RESOGUIT-L] E
Reply to this message