| Subject: | RE: [RESOGUIT-L] String changing | | Date: | Sunday, March 25, 2007 13:34:19 (-0400) | | From: | Andy Katz <andy.katz @.......net>
|
| In reply to: | Message 6400 (written by Peter B) |
Peter,
LOL! But you forgot one thing.
>Place the ball end in the slot. If the string is
>too thick for the slot, use a screwdriver or some
>other inappropriate tool to try to make the slot
>larger. What that's done, then run the string up
>over the nut to the post. Estimate how much string
>you need and insert through the post hole to that
>point. Bend the string at that point since you heard
>that's how to do it. Start cranking and watch the
>string pull out anyway. Make a better bend and hold
>it while starting to crank.
Then the phone rings, and you remember that there was an important call
coming.
This is contributing mightily to my chronic string-change procrastination,
Andy
|
RE: [RESOGUIT-L] S
Reply to this message