| Subject: | Re: [RESOGUIT-L] String changing | | Date: | Sunday, March 25, 2007 20:59:49 (-0500) | | From: | D. Tannehill <ephsmath-phys @...net>
|
OK, I'll add a step too....
Somewhere along the way, you need to get the strings up to the right pitch.
Now is a good time to remember the batteries are dead in the Intelli-touch.
So off to the store for batteries. Realize this store doesn't carry the
right size. Head over accross town to the other store. Listen to
high-schooler behind the counter say they are out of stock, but the store in
another town 20 miles away has one set left.
Dan in RI
----- Original Message -----
From: "Andy Katz" <andy.katz@verizon.net>
To: <resoguit-l@elistas.com>
Sent: Sunday, March 25, 2007 12:34 PM
Subject: RE: [RESOGUIT-L] String changing
> Peter,
>
>
>
> LOL! But you forgot one thing.
>
>
>
> >Place the ball end in the slot. If the string is
>
> >too thick for the slot, use a screwdriver or some
>
> >other inappropriate tool to try to make the slot
>
> >larger. What that's done, then run the string up
>
> >over the nut to the post. Estimate how much string
>
> >you need and insert through the post hole to that
>
> >point. Bend the string at that point since you heard
>
> >that's how to do it. Start cranking and watch the
>
> >string pull out anyway. Make a better bend and hold
>
> >it while starting to crank.
>
>
>
> Then the phone rings, and you remember that there was an important call
> coming.
>
>
>
>
>
> This is contributing mightily to my chronic string-change procrastination,
>
>
>
> Andy
>
>
>
> ---------------------------------------------------------------------
> You're subscribed to this list with the email ephsmath-phys@cox.net
> To unsubscribe, email resoguit-l-unsubscribe@elistas.com
> For information, visit http://www.eListas.com/list/resoguit-l
> For help(do's n'don'ts) email resoguit-l-help@elistas.com
> For neat stuff go to http://www.resoguit.com
> The ListOwner is poobah@resoguit.com
>
|
Re: [RESOGUIT-L] S
Reply to this message